Structural Characterization Research Articles

Structural and functional characterization of the role of acetylation on the interactions of the human Atg8-family proteins with the autophagy receptor TP53INP2/DOR

ABSTRACT The Atg8-family proteins (MAP1LC3/LC3A, LC3B, LC3C, GABARAP, GABARAPL1 and GABARAPL2) play a pivotal role in macroautophagy/autophagy through their ability to help form autophagosomes. Although autophagosomes form in the cytoplasm, nuclear levels of the Atg8-family proteins are significant. Recently, the nuclear/cytoplasmic shuttling of LC3B was shown to require deacetylation of two Lys residues (K49 and K51 in LC3B), which are conserved in Atg8-family proteins. To exit the nucleus, deacetylated LC3B must bind TP53INP2/TP53INP2 (tumor protein p53 inducible nuclear protein 2) through interaction with the LC3-interacting region (LIR) of TP53INP2 (TP53INP2LIR). To examine their selectivity for TP53INP2 and the role of the conserved Lys residues in Atg8-family proteins, we prepared the six human Atg8-family proteins and acetylated variants of LC3A and GABARAP for biophysical and structural characterization of their interactions with the TP53INP2LIR. Isothermal titration calorimetry (ITC) experiments demonstrate that this LIR binds preferentially to GABARAP subfamily proteins, and that only acetylation of the second Lys residue reduces binding to GABARAP and LC3A. Crystal structures of complexes with GABARAP and LC3A (acetylated and deacetylated) define a β-sheet in the TP53INP2LIR that determines the GABARAP selectivity and establishes the importance of acetylation at the second Lys. The in vitro results were confirmed in cells using acetyl-mimetic variants of GABARAP and LC3A to examine nuclear/cytoplasmic shuttling and colocalization with TP53INP2. Together, the results demonstrate that TP53INP2 shows selectivity to the GABARAP subfamily and acetylation at the second Lys of GABARAP and LC3A disrupts key interactions with TP53INP2 required for their nuclear/cytoplasmic shuttling.

Structural, vibrational and optical characterisations of Li2Ba3(P2O7)2:Cr3+ by solid-state reaction method

ABSTRACT Cr3+ doped Li2Ba3(P2O7)2 pyrophosphate nanopowder was successfully synthesised by solid-state reaction technique. The nanopowder was characterised by several techniques. X-ray diffraction analysis reveals orthorhombic crystal structureand average crystallite size values 34.21 and 28.41 nm are determined by Debye Scherrer’s formula and Williamson-Hall (W-H) method. The morphology displayed both SEM and HR-TEM images are irregular stone-like shapes. EDS analysis confirms the constituted elements. The SAED patterns of HR-TEM with well matched with XRD data. FT-IR and Raman spectra analysis confirmed incorporation of Cr3+ in the Li2Ba3(P2O7)2 pyrophosphate nanopowder. The EPR spectrum exhibited signal at g = 1.968 which is attributed to interaction between Cr3+ and Cr3+ exchange pair. The site symmetry of Cr3+ ions occupy a distorted octahedral. Photoluminescence spectrum exhibited bands correspond to ultraviolet, blue and green regions. The evaluated CCT of 6517 K indicates yellowish-green emission near cold light which reveals that the present prepared sample is useful for LEDs applications.

Phytochemical evaluation of Ziziphus mucronata and Xysmalobium undulutum towards the discovery and development of anti-malarial drugs

BackgroundThe development of resistance by Plasmodium falciparum is a burdening hazard that continues to undermine the strides made to alleviate malaria. As such, there is an increasing need to find new alternative strategies. This study evaluated and validated 2 medicinal plants used in traditional medicine to treat malaria.MethodsInspired by their ethnobotanical reputation of being effective against malaria, Ziziphus mucronata and Xysmalobium undulutum were collected and sequentially extracted using hexane (HEX), ethyl acetate (ETA), Dichloromethane (DCM) and methanol (MTL). The resulting crude extracts were screened for their anti-malarial and cytotoxic potential using the parasite lactate dehydrogenase (pLDH) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, respectively. This was followed by isolating the active compounds from the DCM extract of Z. mucronata using silica gel chromatography and structural elucidation using spectroscopic techniques (NMR: 1H, 12C, and DEPT). The active compounds were then targeted against P. falciparum heat shock protein 70–1 (PfHsp70-1) using Autodock Vina, followed by in vitro validation assays using ultraviolet–visible (UV–VIS) spectroscopy and the malate dehydrogenase (MDH) chaperone activity assay.ResultsThe extracts except those of methanol displayed anti-malarial potential with varying IC50 values, Z. mucronata HEX (11.69 ± 3.84 µg/mL), ETA (7.25 ± 1.41 µg/mL), DCM (5.49 ± 0.03 µg/mL), and X. undulutum HEX (4.9 ± 0.037 µg/mL), ETA (17.46 ± 0.024 µg/mL) and DCM (19.27 ± 0.492 µg/mL). The extracts exhibited minimal cytotoxicity except for the ETA and DCM of Z. mucronata with CC50 values of 10.96 and 10.01 µg/mL, respectively. Isolation and structural characterization of the active compounds from the DCM extracts revealed that betulinic acid (19.95 ± 1.53 µg/mL) and lupeol (7.56 ± 2.03 µg/mL) were responsible for the anti-malarial activity and had no considerable cytotoxicity (CC50 > µg/mL). Molecular docking suggested strong binding between PfHsp70-1, betulinic acid (− 6.8 kcal/mol), and lupeol (− 6.9 kcal/mol). Meanwhile, the in vitro validation assays revealed the disruption of the protein structural elements and chaperone function.ConclusionThis study proves that X undulutum and Z. mucronata have anti-malarial potential and that betulinic acid and lupeol are responsible for the activity seen on Z. mucronata. They also make a case for guided purification of new phytochemicals in the other extracts and support the notion of considering medicinal plants to discover new anti-malarials.

Enhancing cannabidiol bioaccessibility using ionic liquid as emulsifier to produce nanosystems: Characterization of structures, cytotoxicity assessment, and in vitro digestion

The emulsifying potential of a biocompatible ionic liquid (IL) to produce lipid-based nanosystems developed to enhance the bioaccessibility of cannabidiol (CBD) was investigated. The IL (cholinium oleate) was evaluated at concentrations of 1 % and 2 % to produce nanoemulsions (NE-IL) and nanostructured lipid carriers (NLC-IL) loaded with CBD. The IL concentration of 1 % demonstrated to be sufficient to produce both NE-IL and NLC-IL with excellent stability properties, entrapment efficiency superior to 99 %, and CBD retention rate of 100 % during the storage period evaluated (i.e. 28 days at 25 °C). The in vitro digestion evaluation demonstrated that the NLC-IL provided a higher stability to the CBD, while the NE-IL improved the CBD bioaccessibility, which was mainly related to the composition of the lipid matrices used to obtain each nanosystem. Finally, it was observed that the CBD cytotoxicity was reduced when the compound was entrapped into both nanosystems.

Delineating organizational principles of the endogenous L-A virus by cryo-EM and computational analysis of native cell extracts

The high abundance of most viruses in infected host cells benefits their structural characterization. However, endogenous viruses are present in low copy numbers and are therefore challenging to investigate. Here, we retrieve cell extracts enriched with an endogenous virus, the yeast L-A virus. The determined cryo-EM structure discloses capsid-stabilizing cation-π stacking, widespread across viruses and within the Totiviridae, and an interplay of non-covalent interactions from ten distinct capsomere interfaces. The capsid-embedded mRNA decapping active site trench is supported by a constricting movement of two flexible opposite-facing loops. tRNA-loaded polysomes and other biomacromolecules, presumably mRNA, are found in virus proximity within the cell extract. Mature viruses participate in larger viral communities resembling their rare in-cell equivalents in terms of size, composition, and inter-virus distances. Our results collectively describe a 3D-architecture of a viral milieu, opening the door to cell-extract-based high-resolution structural virology.

Synthesis of N‐Acyl Indole‐3‐Carboxaldehyde Derivatives and Polyvinyl Alcohol Acetalization with 1‐Propionylindole‐3‐Carboxaldehyde

AbstractA series of seven stable amide derivatives based on indole‐3‐carboxaldehyde were synthesized with high yields using various aliphatic and aromatic acyl chlorides, triethylamine and DMAP as the catalyst at room temperature. Structural characterization was performed using FT‐IR, 1 H‐NMR, 13C‐NMR and LC–MS techniques. To develop bioactive material, acetalization of water‐soluble polyvinyl alcohol was achieved by reacting one of the N‐acyl derivatives, 1‐propionylindole‐3‐carboxaldehyde, in the presence of a p‐TSA catalyst to form polyvinyl acetal with pendant bioactive groups. The polymer was analyzed using 1 H‐NMR, FT‐IR, TGA, DSC, FE‐SEM and EDX spectroscopic techniques. The polymer was water‐insoluble with enhanced thermal stability compared to pure polyvinyl alcohol. This approach for developing N‐acyl derivatives of indole‐3‐carboxaldehyde and then reacting one of the monomers with polyvinyl alcohol to improve its thermal properties and stability in humid conditions has proven successful.

ATENA: A Web-Based Tool for Modelling Metal Oxide Nanoparticles Based on NanoFingerprint Quantitative Structure–Activity Relationships

Modelling size-realistic nanomaterials to analyse some of their properties, such as toxicity, solubility, or electronic structure, is a current challenge in computational and theoretical chemistry. The representation of the all-atom three-dimensional structure of a nanocompound would be ideal, as it could account explicitly for structural effects. However, the use of the whole structure is tedious due to the high data management and the structural complexity that accompanies the surface of the nanoparticle. Developing appropriate tools that enable a quantitative analysis of the structure, as well as the selection of regions of interest such as the core-shell, is a crucial step toward enabling the efficient analysis and processing of model nanostructures. The aim of this study was twofold. First, we defined the NanoFingerprint, which is a representation of a nanocompound in the form of a vector based on its 3D structure. The local relationship between atoms, i.e., their coordination within successive layers of neighbours, allows the characterisation of the local structure through the atom connectivity, maintaining the information of the three-dimensional structure but increasing the management ability. Second, we present a web server, called ATENA, to generate NanoFingerprints and other tools based on the 3D structure of the nanocompounds. A case study is reported to show the validity of our new fingerprint tool and the usefulness of our server. The scientific community and also private companies have a new tool based on a public web server for exploring the toxicity of nanocompounds.

Sol-gel synthesis of Cobalt-Bismuth substituted strontium hexaferrites and insight into structural refinement, Microstructural, dielectric and spectroscopic properties

Bi and Co-substituted strontium (SrFe12O19) hexaferrites were synthesized using the auto-combustion sol–gel method. The structural, Rietveld refinement, microstructural, spectroscopic, and dielectric characterizations were analyzed with X-ray powder diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and Dielectric analysis, respectively. The XRD investigation of Sr1-xBixFe12-yCoyO19 with (x = 0–0.5, y = 0–1.0) confirmed the single phase of M−type hexagonal ferrites. The change in the value of lattice constant ‘a’ in between 5.87 and 5.95 and ‘c’ 22.07 to 23.81 to be noted. The crystallite size of prepared specimens was determined in (20–29) nm range. The specific stretching vibrations in the FTIR results approves (Fe/Co-O and Bi-O) at three different positions 437.59, 549.94, and 587.53 cm−1. The existence of these band from 437 to 588 cm−1 confirmed the hexagonal structure of these ferrites. The force constants at octahedral sites increased from 1.75 to 2.02 (Dyne cm−1) x 105 and shows insignificant behavior at tetrahedral sites in between (3.33–3.54) Dyne cm−1 x 105 with Bi-Co substitution. The first band 582 cm−1 (ʋ1), is due to the maximum restoring force and vibrations at the tetrahedral site. The second band at a lower wavenumber of ∼ 402 cm−1 (ʋ 2) is due to the vibrations at the octahedral site. The microstructure of all synthesized samples of M−type hexagonal ferrites confirmed using the SEM analysis. The dielectric measurements in 0 to 3 GHZ frequency was done and effect of Bi-Co has been observed. The dielectric constant of all specimens shows the increasing trend from 1.5 GHz to 2.5 GHz with the frequency of the applied AC field. A slight increase was observed in the AC conductivity of these ferrites with the increasing concentration of Bi and Co ions.

Synthesis and structural characterization of nickel(II) coordination complexes with mixed-ligand systems: exploring π−π stacking and hydrogen bonding in supramolecular assemblies

Synthesis and structural characterization of nickel(II) coordination complexes with mixed-ligand systems: exploring π−π stacking and hydrogen bonding in supramolecular assemblies

Morphological and Structural Characterization of (Pt, Au, and Ag) Nanoparticle/Zn-MOF-74 Composites

Morphological and Structural Characterization of (Pt, Au, and Ag) Nanoparticle/Zn-MOF-74 Composites

Nonlinear Optical Activity of a Chiral Organic-Inorganic ([(NH3CH2CH2)3NH])2[MnBr5]Br5 Photoluminescent and Piezoelectric Crystal.

The family of Mn-based organic-inorganic hybrids has greatly expanded due to their advantages in applications. They also show superior bright and size-tunable photoluminescence and can be considered a perfect alternative to toxic lead-based compounds. In this work, we present the detailed structural, optical, and electrical characterization of ([(NH3CH2CH2)3NH])2[MnBr5]Br5. The title compound exhibits a unique type of inorganic arrangement created by the trigonal bipyramids. It crystallizes in noncentrosymmetric space group R32, indicating its optical activity, piezoelectricity, and second-order optical nonlinearity proven by the second harmonic of light measurements. The studied crystals exhibit intense photoluminescence originating from the Mn(II) ion 4T1(G) → 6A1 transition. The measured lifetime of the photoluminescence emission is ≤1.5 ms, while the measured quantum yield for both powder and crystal samples reaches ∼70%.

Synthesis of New Ruthenium Complexes and Their Exploratory Study as Polymer Hybrid Composites in Organic Electronics

Polymeric hybrid films, for their application in organic electronics, were produced from new ruthenium indanones in poly(methyl methacrylate) (PMMA) by the drop-casting procedure. Initially, the synthesis and structural characterization of the ruthenium complexes were performed, and subsequently, their properties as a potential semiconductor material were explored. Hence hybrid films in ruthenium complexes were deposited using PMMA as a polymeric matrix. The hybrid films were characterized by infrared spectrophotometry and atomic force microscopy. The obtained results confirmed that the presence of the ruthenium complexes enhanced the mechanical properties in addition to increasing the transmittance, favoring the determination of their optical parameters. Both hybrid films exhibited a maximum stress around 10.5 MPa and a Knoop hardness between 2.1 and 18.4. Regarding the optical parameters, the maximum transparency was obtained at wavelengths greater than 590 nm, the optical band gap was in the range of 1.73–2.24 eV, while the Tauc band gap was in the range of 1.68–2.17 eV, and the Urbach energy was between 0.29 and 0.50 eV. Consequently, the above comments are indicative of an adequate semiconductor behavior; hence, the target polymeric hybrid films must be welcomed as convenient candidates as active layers or transparent electrodes in organic electronics.

Contemporary HIV-1 consensus Env with AI-assisted redesigned hypervariable loops promote antibody binding

An effective HIV-1 vaccine must elicit broadly neutralizing antibodies (bnAbs) against highly diverse Envelope glycoproteins (Env). Since Env with the longest hypervariable (HV) loops is more resistant to the cognate bnAbs than Env with shorter HV loops, we redesigned hypervariable loops for updated Env consensus sequences of subtypes B and C and CRF01_AE. Using modeling with AlphaFold2, we reduced the length of V1, V2, and V5 HV loops while maintaining the integrity of the Env structure and glycan shield, and modified the V4 HV loop. Spacers are designed to limit strain-specific targeting. All updated Env are infectious as pseudoviruses. Preliminary structural characterization suggests that the modified HV loops have a limited impact on Env’s conformation. Binding assays show improved binding to modified subtype B and CRF01_AE Env but not to subtype C Env. Neutralization assays show increases in sensitivity to bnAbs, although not always consistently across clades. Strikingly, the HV loop modification renders the resistant CRF01_AE Env sensitive to 10-1074 despite the absence of a glycan at N332.

Bifunctional titanium boron-phosphate glass containing Ag nanoparticles for the detection and photocatalysis of organic compounds

This study delves into the structural characterization of a composition comprising Ag-NPs/phosphate plasmonic glass. Additionally, it explores two applications aimed at addressing one of the numerous challenges facing the modern world. The continuous technological progress of society has led to the proliferation of chemicals in natural water sources, posing a significant threat to ecosystems due to their low concentrations, making them difficult to detect and remove. The findings presented herein showcase the potential of Ag-NPs/sodium/titanium-phosphate glasses as a promising solution for detecting and degrading organic pollutants in freshwater. To achieve this, Ag nanoparticles were integrated into the glass surface via the ion exchange method, followed by thermal treatment. Subsequently, the detection of crystal violet solutions, applied dropwise onto the sample surface, was successfully carried out using surface-enhanced Raman spectroscopy, reaching a detection limit as low as 10−6 M. Furthermore, the glass composition demonstrated heterogeneous photocatalytic properties for UV degradation of methylene blue, with enhanced photoactivity attributed to the presence of silver nanoparticles, resulting in a 111 % increase in the kinetic constant compared to unmodified glass. Thus, these newly developed Ag-NPs sodium titanium-phosphate glasses exhibit remarkable bifunctional capabilities, offering improved optical detection and efficient photodegradation of organic molecules.

Nα-Aroyl-N-Aryl-Phenylalanine Amides: A Promising Class of Antimycobacterial Agents Targeting the RNA Polymerase.

Tuberculosis (TB), caused by Mycobacterium tuberculosis, remains the leading cause of death from a bacterium in the world. The global prevalence of clinically relevant infections with opportunistically pathogenic non-tuberculous mycobacteria (NTM) has also been on the rise. Pharmacological treatment of both TB and NTM infections usually requires prolonged regimens of drug combinations, and is often challenging because of developed or inherent resistance to common antibiotic drugs. Medicinal chemistry efforts are thus needed to improve treatment options and therapeutic outcomes. Nα-aroyl-N-aryl-phenylalanine amides (AAPs) have been identified as potent antimycobacterial agents that target the RNA polymerase with a low probability of cross resistance to rifamycins, the clinically most important class of antibiotics known to inhibit the bacterial RNA polymerase. In this review, we describe recent developments in the field of AAPs, including synthesis, structural characterization, in vitro microbiological profiling, structure-activity relationships, physicochemical properties, pharmacokinetics and early cytotoxicity assessment.

A Novel Approach Using Reduced Graphene Oxide for the Detection of ALP and RUNX2 Osteogenic Biomarkers

In this work, we propose a new technique involving the modification of commercial screen-printed carbon electrodes with electrochemically reduced graphene oxide to serve as the starting point of a future electrochemical biosensor for the detection of two osteogenic biomarkers: alkaline phosphatase (ALP) and Runt-related transcription factor 2 (RUNX2). The electrodes were characterized after each modification by cyclic voltammetry and electrochemical impedance spectroscopy, showing the appropriate electrochemical characteristics for each modification type. The results obtained from scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and contact angle measurements are well correlated with each other, demonstrating the successful modification of the electrodes with graphene oxide and its subsequent reduction. The bioreceptors were immobilized on the electrodes by physical adsorption, which was confirmed by electrochemical methods, structural characterization, and contact angle measurements. Finally, the functionalized electrodes were incubated with the specific target analytes and the detection relied on monitoring the electrochemical changes occurring after the hybridization process. Our results indicated that the pilot platform has the ability to detect the two biomarkers up to 1 nM, with increased sensitivity observed for RUNX2, suggesting that after further optimizations, it has a high potential to be employed as a future biosensor.

Structure characterization and intestinal immune promotion effect of polysaccharide purified from Alhagi camelorum Fisch

This study investigated the structure of acid Alhagi camelorum Fischa polysaccharide (aAP) and its impact on intestinal activity in mice. The results showed that aAP comprised of the fucose, arabinose, rhamnose, galactose, glucose, xylose, mannose, galacturonic acid, glucuronic acid with the molar ratio of 0.81:14.97:10.84:11.14:3.26:0.80:0.80:54.92:2.47 with the molecular weight (Mw) of 22.734 kDa. Additionally, the composition of aAP was assessed via FT-IR, methylation, and NMR analyses, indicating that the backbone of the aAP was consisted of →4)-α-D-GalpA-6-OMe-(1 → 4)-α-GalpA-(1 → and →4)-α-D-GalpA-6-OMe-(1 → 2)-α-L-Rhap-(1→, as well as →4)-β-D-Galp- and →5)-α-L-Araf- for the branched chain. Furthermore, ICR mice underwent intragastric administration of different concentrations of aAP for 7 consecutive days. The results showed that aAP enhanced the murine spleen and thymus indices, promoted the secretion of serum lgG antibody, intestinal lgA antibody and intestinal cytokines, improved the morphology of intestinal villi and crypts, enhanced quantity of intestinal IELs and IgA+ cells, and activated T lymphocytes and DC cells in MLNs. In summary, these findings suggest that the utilization of aAP could enhance the immune response of the murine intestinal mucosa.

[Characterization of Microplastic Surface Bacterial Community Structure and Prediction of Ecological Risk in Poyang Lake, China].

In recent years, the environmental pollution of microplastics in Poyang Lake has received increasing attention. Baisha Lake of Poyang Lake was selected as the study area, and samples of water and sediments of Baisha Lake and the microplastics therein were collected, and the polymer types of microplastics were identified as polyethylene (PE), polyester (PET), polypropylene (PP), and polystyrene (PS) using Fourier infrared spectroscopy. We also analyzed the structural composition of bacterial communities in water, in sediments, and on microplastic surfaces using 16S high-throughput sequencing. The species richness and diversity of bacteria on the microplastic surfaces were lower than those in the surrounding water and sediments. The results of NMDS analysis showed that the bacterial community structures on the microplastic surfaces differed greatly from those in the surrounding sediments and water. The bacterial community composition in water and sediment differed from that on the microplastic surfaces, and the dominant bacterial phyla on the microplastic surfaces were Proteobacteria and Bacteroidota, and their relative abundance on the microplastic surfaces was higher than that in sediment. The relative abundance of Proteobacteria was higher than that in water. The relative abundances of Bacteroidota and Actinobacteriota were significantly lower than that of water. Massilia and Pseudomonas were the dominant genera on the microplastic surfaces, and their relative abundances were significantly higher than those in the surrounding water and sediments. BugBase phenotype prediction revealed that the relative abundance of contains mobile elements, biofilm formation, potential pathogenicity, and stress tolerance phenotypes of microplastic bacterial communities were significantly higher than those of the surrounding water and sediments. The results revealed that microplastics may have contributed to the spread of harmful bacteria, including pathogenic bacteria, and increased the potential pathogenicity of bacterial communities. Additionally, microplastic surface bacterial communities had higher phenotypes of mobile gene element content. Revealing the potential harm of microplastic pollution to wetland ecology at the micro level may provide a scientific reference for maintaining the ecological stability of wetlands.

Seismic Characterization of Subsurface Structures at Rock Valley, Nevada

ABSTRACT The Source Physics Experiment (SPE) aims at improving explosion monitoring techniques by investigating source characteristics of chemical explosions in geologic formations. One of the critical tasks in Rock Valley Direct Comparison (RV/DC), SPE phase III, is to prepare for the main experiment by characterizing the subsurface structures at the test site. Based on the seismic data acquired during an accelerated-weight-drop (AWD) seismic survey at Rock Valley, we first pick the P-wave first-arrival travel times and derive a P-wave velocity model using the adjoint-state first-arrival travel-time tomography. We then apply reverse-time migration to the processed seismic data and obtain high-resolution images of the subsurface structures along the two main survey lines. Our migration results show several reflectors corresponding to major geologic formation boundaries. We employ a multitask machine learning model to enhance the reverse-time migration images and identify faults from these images. We find that our automatically picked faults correlate well with the locations of known faults in the region in addition to many geologically undetected faults. Our subsurface characterization results refine our understanding of the geology in this region and provide valuable velocity and structural information for RV/DC geologic model building and fault identification.

Limited miscibility in hydrated DPPC – Lyso-PPC systems

Hydrated dipalmitoylphosphatidylcholine (DPPC) and lyso-palmitoylphosphatidylcholine (Lyso-PPC, abbreviated as LPC) mixtures form vesicles composed from periodically or randomly arranged layers and micelle-like nanoparticles, as revealed by a wide range of thermodynamical, structural, and morphological characterization methods. Based on five different experimental methods, we have reconstructed the phase diagram of the system. The micelle-like objects are strongly anisotropic and are identified as bicelles. Even a small amount of LPC induces drastic changes in the thermotropic phase behaviour of DPPC. Here, an interdigitated gel (LβI) structure, coexisting with the other gel phases, forms at moderate LPC concentration. Bicelles and LβI structured vesicles appear in the equimolar LPC ratio range (0.4 ≤ XLPC ≤ 0.6). Two complex phase transition regimes are detectable. Between 36–40 °C, bicelles are pre-melted while domains of LβI structure are “crystallized” through local endothermic and exothermic transitions, respectively. Then, around 42 °C the chains of both the LβI and bicelles melt completely. Above the equimolar LPC ratio range (XLPC > 0.6) the chain melting in the LβI structure vanishes, while this transition still exists in the chain region of bicelles. This wealth of structural forms, due to the weak first order transition characteristics, is highly sensitive for perturbations and interactions induced by e.g. the presence of membrane proteins.